DAP XLR Cable FLN0110 Neutrik® 10 m

XLR Cable FLN0110 Neutrik® for confident 10 m balanced connections

The XLR Cable FLN0110 Neutrik® is a 10 m balanced microphone/line cable made for reliable audio over longer stage and venue distances. It uses Neutrik NC3XXX-BAG XLR connectors with silver-plated contacts to maintain consistent connectivity, and combines OFC copper conductors with spiral shielding to help reduce hum and interference. Choose 10 m when you need to reach from a stage position to a side-stage mixer, FOH input point or distant stagebox.

Key features of XLR Cable FLN0110 Neutrik®

• ✓ 10 m balanced XLR cable for long routing
• ✓ Neutrik NC3XXX-BAG connectors for high reliability
• ✓ Silver-plated contacts for stable, low-impedance signal
• ✓ 2 × 0.22 mm² OFC conductors for solid audio transfer
• ✓ OFC spiral shielding to reduce interference
• ✓ Hook-and-loop fastener for organised storage

Detailed features and ideal use

Built with two 0.22 mm² conductors (AWG 24) and spiral shielding, this cable supports balanced audio connections that help preserve clarity across longer runs. The 5.9 mm outer diameter keeps it manageable to coil and deploy, even at 10 m. With XLR 3-pin male to XLR 3-pin female wiring, it fits microphones, DI boxes, stagebox feeds and balanced outputs from pro audio devices. It’s especially useful for small venues where cable runs must cross wider stages or reach side fills.

Why choose this cable over basic XLR leads

At 10 metres, poor connector tolerances and weak strain relief can quickly become a problem. The XLR Cable FLN0110 Neutrik® uses genuine Neutrik NC3XXX-BAG connectors with silver-plated contacts for dependable mating and consistent electrical contact. Together with OFC conductors and shielding, it provides a more predictable result than generic long leads, helping reduce intermittent issues during setup and performance. It’s a practical upgrade for engineers who value stability and durability.

What’s in the Box

• ✓ XLR Cable FLN0110 Neutrik® (10 m), XLR 3P male to XLR 3P female
• ✓ Hook-and-loop cable fastener

Quick start guide

Plug the XLR female end into the microphone or balanced output device, then connect the XLR male end to your mixer, stagebox or powered speaker input. For long runs, route the cable along safe paths and tape it down where people walk. Keep it away from power cables and transformers when possible. Coil excess neatly and secure it with the fastener. Confirm both connector latches are locked, then run a quick line check at performance level.

Frequently Asked Questions

Will this work with microphones, line-level gear and powered speakers with XLR?

Yes, it is an XLR 3-pin male to XLR 3-pin female cable suitable for balanced inputs and outputs on microphones, mixers, interfaces and powered speakers.

Does it include original Neutrik connectors?

Yes, it is fitted with Neutrik NC3XXX-BAG XLR connectors with silver-plated contacts for stable, reliable connections.

Is this a balanced XLR cable and does it help reduce hum and noise?

Yes, it uses two conductors plus spiral shielding for balanced microphone or line connections, helping minimise hum and interference in typical pro-audio setups.

Is the cable flexible enough for gigging?

Yes, its compact diameter is designed for practical handling, routing and regular live use.