XLR Cable FLN01150 Neutrik® for clean, reliable balanced audio
The XLR Cable FLN01150 Neutrik® is a 1.5 m balanced XLR microphone/line lead made for dependable signal transfer in studios, rehearsal rooms and live setups. It combines professional Neutrik NC3XXX-BAG XLR connectors with silver-plated contacts for stable connections, plus OFC copper conductors and spiral shielding to help keep noise under control. The 1.5 m length is ideal when you need a little extra reach without creating cable clutter around stands, racks or small stages.
Key features of XLR Cable FLN01150 Neutrik®
- ✓ 1.5 m balanced XLR lead for flexible placement
- ✓ Neutrik NC3XXX-BAG connectors for pro reliability
- ✓ Silver-plated contacts for stable, low-impedance signal
- ✓ 2 × 0.22 mm² OFC conductors for solid audio transfer
- ✓ OFC spiral shielding to reduce interference
- ✓ Hook-and-loop fastener to keep cable runs neat

Detailed features and ideal use
This cable uses two 0.22 mm² conductors (AWG 24) and a spiral shield to support balanced audio connections that help reject hum and noise. Its compact 5.9 mm outer diameter keeps it flexible for tight spaces and frequent handling. With XLR 3-pin male to XLR 3-pin female wiring, it suits microphones to mixers, interfaces, stageboxes and powered speakers. Choose 1.5 m for drum risers, desktop interfaces, or when a 0.75 m lead is just too short.
Why choose this cable over basic XLR leads
Budget XLR cables often fail first at the connectors, where plating, strain relief and tolerances matter most. The XLR Cable FLN01150 Neutrik® focuses on long-term reliability with genuine Neutrik NC3XXX-BAG connectors and silver-plated contacts designed for consistent mating cycles. Combined with OFC conductors and effective shielding, it delivers predictable performance for installers, rental stock and working engineers who want fewer intermittent faults and less troubleshooting during sessions and shows.
What’s in the Box – XLR Cable FLN01150 Neutrik®
- ✓ LR Cable FLN01150 Neutrik® (1.5 m), XLR 3P male to XLR 3P female
- ✓ Hook-and-loop cable fastener
Quick start guide
Connect the XLR female end to your microphone or device output, then connect the XLR male end to the input of your mixer, interface, stagebox or powered speaker. Route the cable away from mains adapters and power cables where possible, and use the included hook-and-loop fastener to bundle excess length. Confirm the latch clicks into place on both ends, then do a quick signal check at working level before the performance or recording begins.
Frequently Asked Questions
Will this work with microphones, line-level gear and powered speakers with XLR?
Yes, it is an XLR 3-pin male to XLR 3-pin female cable suitable for balanced inputs and outputs on microphones, mixers, interfaces and powered speakers.
Does it include original Neutrik connectors?
Yes, it is fitted with Neutrik NC3XXX-BAG XLR connectors with silver-plated contacts for stable, reliable connections.
Is this a balanced XLR cable and does it help reduce hum and noise?
Yes, it uses two conductors plus spiral shielding for balanced microphone or line connections, helping minimise hum and interference in typical pro-audio setups.
Is the cable flexible enough for gigging?
Yes, its compact diameter is designed for practical handling, routing and regular live use.






